-40%

DENON PMA-SX1 LIMITED operation checked

$ 3960

Availability: 77 in stock
  • Year Manufactured: 2018
  • Model: PMA-SX1
  • Brand: Denon
  • Condition: Used
  • Type: Power Amplifier

    Description

    [Description]
    Rated output 50 W + 50 W (8 ohms, 20 Hz to 20 kHz, THD 0.1 %)
    100 W + 100 W (into 4 ohms, 1 kHz, THD 0.7 %)
    Total harmonic distortion ratio 0.01 % (rated output at -3 dB), 8 Ω load, 1 kHz
    Input sensitivity / input impedance EXT. PRE: 0.7 V / 25 kΩ
    Gain value: 29 dB
    PHONO (MM): 2.5 mV / 47 kΩ
    PHONO (MC Low): 200 μV / 50 Ω
    PHONO (MC High): 200 μV / 100 Ω
    CD, NETWORK, TUNER, AUX, RECORDER :105 mV / 47 kΩ
    BALANCED: 105 mV / 95 kΩ
    Maximum input PHONO (MM): 130 mV / 1 kHz
    PHONO (MC): 10 mV / 1 kHz
    Analog Audio Input Terminals Balanced input x 1, Unbalanced input x 5, PHONO (MM) input x 1, PHONO (MC) input x 1, EXT. PRE x 1
    Analog audio output terminals Unbalanced output (RECORDER) x 1
    S / N ratio (A network, 8 Ω load) PHONO (MM): 82 dB (input terminals shorted, input signal 5 mV)
    PHONO (MC): 70 dB (input terminal shorted, input signal 0.5 mV)
    CD, NETWORK, TUNER, AUX, RECORDER: 105 dB
    BALANCED: 102 dB (input terminals shorted)
    Frequency Response 5 Hz to 100 kHz (0 to -3 dB)
    Dimensions (W × H × D) 434 x 181 x 504 mm
    Weight 29.5 kg
    Power consumption 275 W
    Condition No major defects of note, but operation is good.
    Accessories Operation manual, remote control, power cord
    ◆Features
    A new generation flagship pre-main amplifier created by sound master Shinichi Yamauchi over a period of four years
    Flagship model that embodies "Vivid & Spacious
    37 types of custom capacitors
    Newly developed top cover and foot made of A7075 (super duralumin)
    All-stage balanced amplifier configuration
    Advanced UHC MOS single push-pull circuit
    CR type phono equalizer with impedance switch for MC and MM
    High-quality sound custom block capacitors with low-magnification foil
    High-capacity power transformer with aluminum sand casting case
    [Shipping]
    Free shipping by Fedex or DHL or EMS(Japan Post)
    Insured, Trackable, Including handling cost.
    Within 10 days of handling until shipment.
    Usually arrives in 3-7 days after shipping.
    However, items that require special time for customs clearance,
    or items with a remote destination will take longer.
    It may take more due to the influence of the pandemic
    [International Buyers - Please Note]
    Import duties, taxes and charges are not included in the item price or shipping charges.
    These charges are the buyer's responsibility.
    Please check with your countrys customs office to determine what these additional costs will be prior to buying.
    These charges are normally collected by the delivering freight (shipping) company or
    when you pick the item up do not confuse them for additional shipping charges.
    We do not mark merchandise values below value or mark items as "gifts" - US and
    International government regulations prohibit such behavior.
    Thanks for seeing my page
    ARIGATO!!