SPL Phonitor 2730

Description

Sound Performance Lab Phonitor- Model 2730 SPL Phonitor Headphone Monitoring Amplifier System Details The SPL Phonitor design is SPL's high-end interpretation for what a complete headphone amplifier should be. A well chosen system of Phonitor and headphones can by and large replace loudspeakers and offers all that is required for a successful session long listening periods without ear fatigue. We therefore refer to the Phonitor as a headphone monitoring amplifier system. The basis for this high-end development is SPL's proven 120 volts reference technology based on handmade operation amplifiers (or, Op Amps). 120 volts corresponds to approximately four times the performance of standard analogue audio semiconductor technologies and twice that of the most powerful designs. Through such 120 volts circuitry and processing, SPL reaches performance levels far beyond conventional designs in dynamic range and distortion levels, and the main technical specifications in music reproduction exceeds all known analogue or digital standards. In addition to its standard monitoring functions the Phonitor offers new controls such as “Crossfeed“, “Speaker Angle“ and “Center Level“. These are the essential parameters that create the width, balance and overall space within a listening field and how we recognize them coming from the loudspeaker. Crossfeed simulates the frequency dependent interaural level differences from both channels. Speaker Angle determines the stereo width caused by frequency dependent interaural time differences. Center Level regulates the balance between phantom centre and L/R stereo signals. Aside from its outstanding abilities as a loudspeaker substitute, the Phonitor offers well equipped studios a fully functional monitoring alternative.
Audio
Frequency Response: ‹10Hz to ›200kHz (-3dB)
CMR:-80dBu(@1kHz, 0dBu input level/unity gain)
Crosstalk @ 1kHz: -67dB
THD: 0,005% (@ 1kHz and 0dBu input level/unity gain
Noise (A-weighted): -97dBu
Dynamic Range: 129,5dB(@ connection with 600 Ohms Impedance)
Inputs
(XLR connections, electronically balanced)
Impedance: ca. 20 Ohms balanced/ca. 10 Ohms unbalanced
Maximum Input Level: +24dBu
Outputs
XLR Connections: Input thru, electronically balanced
Headphone Output: 6,3 mm stereo TRS connection
Pin Wiring Tip = left, Ring = right, Shaft = GND, Impedance: 9 Ohms
Power Amplifier
Max. Output Performance:
1,7W (+32,2dBm) @ 1 kHz and 600 Ohms connection
360mW (+25,6dBm) @ 1 kHz and 30 Ohms connection
Display Elements
VU Meter: Input levels from -20dB to +5dB
Signal LED: Input signals from -22dBu
Overload LED: Displays input overload from +21dBu
Power Supply
Voltages: 230V AC, 50Hz/120V AC, 60Hz
Power Consumption: max 23,7VA
Fuses (slow blow): 200-240V AC: 500mA/100-120V AC: 1A
H x W x D (mm): 106 x 216 x 393 (H w/o Feet 88mm/2U)
.  Please phone for an appointment if you wish to visit our
showroom at the ocean in the Miami/Fort Lauderdale area.
We have an incredible selection of high end new and used  high end equipment and also offer repair services at the highest level.
We ship by either USPS or Fedex International under 70 lbs and Fedex or UPS over 70lbs.